[slider][slide link=””]http://www.americanwoodoil.com/wp-content/uploads/2012/10/olive-grey.jpg[/slide][slide link=””]http://www.americanwoodoil.com/wp-content/uploads/2012/10/wenge-tone.jpg[/slide][slide link=””]http://www.americanwoodoil.com/wp-content/uploads/2012/10/white-wash.jpg[/slide][/slider]

[two_third last=”no”]The rainbow color pigments are high quality interior stains.
They are concentrated pigments formulated to mix with The Legendary American Wood Oil Transparent Gold , Warm Grey or SuperGreen+.
Create your own color tone with a choice of 10 basic pigments.

  • White
  • Grey
  • Olive grey
  • Boston Grey
  • Beige
  • Tile Red
  • Cherry
  • Mahogany
  • Brown
  • Black

After coloring always fixate and protect the color by applying 1 or 2 coats of Clear Seal, Hardwax Oil, waterbased lacquer. Depending on what kind of finish you prefer.

  • Suitable for dense and hardwood
  • Penetrates in the wood grain and give an even color across the wood
  • Used as a base coat, color in 1 layer
  • Colors pigments are inner mixable
  • Maximum of 3 pigments in 1 US gallon
  • Enriches the wood with a beautiful color tone
  • Protect the color with Clear Seal , Hard Wax Oil or 4Nature

[one_third last=”yes”][button color=”lightgray” size=”small” gradient1=”” gradient2=”” link=”http://www.americanwoodoil.com/wp-content/uploads/2012/10/MSDS-pigment-brown.pdf” target=””]Download MSDS Pigment Brown[/button][button color=”lightgray” size=”small” gradient1=”” gradient2=”” link=”/wp-content/uploads/2020/01/A4_Technische_Rainbow_Color_Pigments.pdf” target=”_blank”]Download Tech data sheet Rainbow Pigments[/button]

[/two_third][one_third last=”yes”]


Approx. 80 m2 per gallon (3.8 l) per coat, depending on the type of wood.

Recommended coats:

Color the wood in 1 coat.
If you like to darken or adapt the color, it’s possible to color in multiple layers.

Application :

Add 1 to maxium 3 pigments in 1 gallon (Transparent Gold, Warm grey, SuperGreen+)
Stir well for 5-10 minutes , also during application.
Apply with a cotton cloth, paint brush or polishing machine.
Let the oil and pigment penetrate after 5-10 minutes wipe off the excess stain.
Color should be applied at room temperature (minimum 16 C)
And at normal air humidity (55 to 75 %). Wait minimum 8 hours in between coats.


Matt , acts as a primer needs a finishing coat.
Choose your finish within the American Wood Oil products.
Clear Seal, Hardwax Oil or water based lacquer.