[slider][slide link=””]http://www.americanwoodoil.com/wp-content/uploads/2012/10/4nature1.jpg[/slide][slide link=””]http://www.americanwoodoil.com/wp-content/uploads/2012/10/4nature2.jpg[/slide][/slider]

[two_third last=”no”]4nature water based lacquer is a high quality interior wood finish.
It’s an exceptional lacquer that has been specifically formulated to be crystal clear.
It will not alter or enhance the wood color, ensuring a natural timber look and an “as sanded” appearance. Highly appreciated by designers and contractors seeking a clean, contemporary look. 4nature water based lacquer can be used on unfinished wood as well as on the NY colors. There are 3 different finishes, super matt, matt and glossy.

  • Suitable for all types of wood, dense, hard and exotic wood
  • Superb durability and performance
  • UV stable – non yellowing
  • Fast drying and curing
  • Excellent heavy traffic resistance
  • Eco-friendly, Very low VOC
  • Crystal clear
  • Super matt , satin & glossy finish

[one_third last=”yes”][button color=”lightgray” size=”small” gradient1=”” gradient2=”” link=”http://www.americanwoodoil.com/wp-content/uploads/2012/10/4nature-msds.pdf” target=””]Download MSDS[/button][button color=”lightgray” size=”small” gradient1=”” gradient2=”” link=”/wp-content/uploads/2020/01/A4_Technische_4Nature.pdf” target=”_blank”]Download Tech data sheet[/button]

[/two_third][one_third last=”yes”]

Consumption:

Approx. 45 m2 per gallon (3.8 l) per coat, depending on the type of wood.

Recommended coats:

Residential and domestic floors, 2 to 3 coats, depending on type of wood.

Application :

The product should be applied at room temperature (minimum 16°C) and at normal air humidity (55 to 75 %). Wait minimum 3 hours in between coats

Appearance:

Super matt (5% sheen) satin (20%sheen) and glossy (35% sheen)
Suitable for all wood species after sanding 60-80-100-120.

[/one_third]