[slider][slide link=””]http://www.americanwoodoil.com/wp-content/uploads/2012/10/FixTone-e1351164440822.jpg[/slide][/slider] [two_third last=”no”]Fix & Tone is a high quality Hardwax Oil to neutralize and stabilize the color achieved with Aging Powder.
It’s a special Hardwax Oil that has to be applied minimum 3 hours after Aging Powder. First take off the excess aging powder with a white or green buffing pad. Fix&Tone will keep or enhance the antique look that you required.

  • Stabilize or enhance the Aging Powder
  • Excellent for Oak and tannic wood
  • Keeps the aged color and effect of the wood
  • Antique , reclaimed old barn look
  • Different colors, shades  possible
  • Eco-friendly, very low VOC

[one_third last=”yes”][button color=”lightgray” size=”small” gradient1=”” gradient2=”” link=”http://www.americanwoodoil.com/wp-content/uploads/2012/10/MSDS-FixTone.pdf” target=””]Download MSDS[/button][button color=”lightgray” size=”small” gradient1=”” gradient2=”” link=”http://www.americanwoodoil.com/wp-content/uploads/2012/10/Tech-data-sheet-FixTone.pdf” target=”_blank”]Download Tech data sheet[/button] [/two_third]
[one_third last=”yes”]


Approx. 40 m2 per liter per coat, depending on the type of wood.

Recommended coats:

Apply 1 coat to stabilize or enhance the color of the Aging Powder. Use a white or green pad on a buffing machine.

Application :

The product should be applied at room temperature (minimum 16°C) and at normal air humidity (55 to 75 %). Wait minimum 8 hours in between coats


Fix&Tone is not a final coat. Choose between Clear Seal Oil, Hardwax Oil or 4Nature Waterbased lacquer. Apply 1 or 2 coats of these products for the perfect finish. [/one_third]